Precautions for gun cleaning station, maintenance and upkeep of gun cleaning station

1. When maintaining the gun cleaning station, do not place it under working conditions casually. The compressed air should be cut off to prevent automatic or accidental operation by others, which may cause accidental operation of the gun cleaning station and pose a danger to personal health.

2. When the gun cleaning station is in operation, do not touch the rotating blade and the wire cutting machine to avoid danger to the limbs; Items or clothing worn on the body may be caught in the gun cleaning station mechanism by the cutter.

3. When using a silicone oil spraying device, be sure not to let the sprayed anti splash liquid accidentally enter the eyes.

Maintenance and upkeep of the gun cleaning station

1. V-shaped block: As the V-shaped block is a positioning device for welding gun cleaning, it must be closely attached to the nozzle in order to prepare for position. So this position must be cleaned thoroughly to avoid any debris on the V-shaped block, which may cause deviation and damage the welding gun during cleaning.

2. V-shaped block adjustment bracket: Adjusting the bracket is to adjust the position of the V-shaped block. Due to the easy wear and tear of the V-shaped block during long-term gun cleaning, the position of the bracket needs to be adjusted to ensure accurate gun cleaning and clean cleaning.

3. Pneumatic motor: The power device for cleaning the cutter of the welding gun. When replacing the cutter, it is necessary to loosen the fastening bolts and lower the pneumatic motor before replacing the cutter. So it is necessary to clean it thoroughly to avoid position deviation when adjusting the pneumatic motor.

4. Cutting mechanism: cutting welding wire. The wire cutting mechanism should be cleaned regularly to avoid unsmooth cutting.

5. Collecting cup: Hold welding slag and cut welding wire. After each shift is completed, the collection cups should be cleaned in a timely manner.

6. Unscrew the corkscrew under the pneumatic motor every week to drain water to prevent rusting of the shaft and affecting its rotation.

7. Check the silicone oil in the silicone oil bottle once a week。